Your Cart is Empty
IstaBreeze Kit i-1000W 24V/ 48V Wind Turbine & Hybrid Charge Controller & Tower
$1,015.00 - $1,265.00
Original wind generator Ista Breeze i-1000
Extremely robust wind generator of the latest generation.
Made from fiberglass-reinforced plastic, the rotor blades are very durable and stable and at the same time unusually light.
The housing is equipped with cooling fins and is made of high-strength aluminum.
The maintenance-free sliding contact (without coal) guarantees a good flow of current and thus no twisting of the cable in the mast.
Installation in mast tube by plug connection. Required mast tube inner diameter: 37 mm nominal size!
Further technical data further down in the description.
This product is used successfully 1000 times worldwide!
Matching charge controllers and masts can be found in our shop!
Can also be used in combination with photovoltaic solar cells with our 24 volt hybrid charge controller.
5 BLADE VERSION IS RECOMMEND ONLY FOR LOW WIND AREAS
Blade Specification
- Material: Plastic + 30% glass fibers
- Lenght of per blade: 107 cm
- Weight of per blade: 660 g
- Rotor Diameter: 225 cm
MAST/TOWER SPECIFICATION
4 meters IstaBreeze® TOWER for wind generator i-700 to i-2000,
(our WindSafe models require an adapter)
It has never been so easy to install a wind generator.
With the IstaBreeze® Tower it is possible to build a wind generator in a few minutes.
The folding system simplifies the whole process.
During maintenance, only a few screws are released and the tower can be folded for maintenance.
The mast can be extended by a maximum of 2 meters!
Dowels and screws for the floor (concrete floor) is still needed !!
Diameter of the mast is: 60 mm
Inner hole, plug connection Wind generator IstaBreeze® .......... 37 mm
Optional The vibration damper for the wind generators i-500- L-500 and i-700 to i-2000, reduces the transmission of structure-borne noise from the wind generator into the mast and thus possibly into the house. The retrofit is very simple, because the body silencer has the same dimensions as the wind generator, it must only be inserted between them and screwed with matching screws on the mast and the wind generator. (Not for WindSafe models)
The vibration damper is compatible with our original IstaBreeze® masts 15kg and 40kg.
SPECS
- Voltage:24 V / 48V(AC)
- Rated Power:1000WMax. Power:1200W
- Current:40 A
- Min Battery Voltage:17,5V
- Recommended Battery:Gel
- Nominal Battery Voltage:24 Vdc/ 48 Vdc
- Blade Length:107 cm
- Rotor Diameter:220 cm
- Blade Material:Composite
Hybrid Charge Controller Specs
| Nominal battery voltage | 12 oder 24v | 24V | 24V | 48v |
| Power wind turbine | 800W | 1000W | 1500W | 2000w |
| Power Pv modules maximum | 300W | 600W | 600W | 600w |
| charging voltage | 12,6V | 25,2V | 25,2V | 50,5V |
| Charging current wind max. | 45A | 45A | 33A | |
| Battery undervoltage shutdown | 8,5 V | 17,5V | 17,5V | 45V |
| Voltage for battery charging end and at the beginning of the magnetic brake | 14,8V | 28,4V | 28,4V | 58,4V |
| protection voltage | 16V | 30V | 30V | 64V |
|
Dimensions in mm |
300x200x150 | 300x200x150 | 300x200x150 | 300x200x150 |
| Weight in kg | 3 | 3 | 3 | 3 |
| Recommended battery | 12V / 24V | 100 A | 100 A | 100 A |
| Maximum input voltage | 25V / 45V | 45V | 45V | 60V |